Moling Company in Bromley: Trenchless Lead Pipe Replacement Across BR1–BR2
We’re T&L Moling Contractors, WIAPS-registered moling specialists working across the London Borough of Bromley and the BR1 and BR2 postcodes, including Shortlands, Bickley, Sundridge Park, Hayes and Keston. Bromley is the largest London borough by area, with 47 conservation areas and a housing stock that runs from late-Victorian villas through 1930s semis.
We’ve replaced old lead supply pipes here using trenchless moling, fitting modern MDPE without tearing up driveways or front gardens.
Need a quote? Call on the number below or use the form.
Get a quick quote
Accreditations
About Us
Bromley’s transformation from a Kent market town into a Greater London borough was set off by the railway reaching Shortlands in 1858. The Victorian professionals who moved out from central London built the large detached villas you still see across Shortlands, Bickley and Sundridge Park, and Edwardian and 1930s suburban estates filled in around them through Hayes, Keston and Bromley Common. A lot of these homes still carry their original lead service lines, and many sit inside one of the borough’s 47 conservation areas. In April 2026 we carried out a lead pipe replacement in Bromley itself, running new MDPE beneath the driveway and pathways using the no-dig method, and we cover adjacent areas including Beckenham, Orpington and Chislehurst.
The method is straightforward. We dig two small access pits, one near the boundary stopcock and one where the pipe enters the property, then drive a mole between them and pull the new MDPE pipe through behind it. Tiled paths, lawns and block paving stay intact, and most Bromley jobs are finished in a single day.
Customer Reviews
Why choose us?
Fast turnaround & competitive pricing
Minimal mess & no trenches
Fully approved & insured
Friendly, professional service
What is Moling?
Moling is a no-dig way of installing a new water supply pipe along the route of an old one, which suits Bromley’s mix of Victorian, Edwardian and 1930s property particularly well. Much of the borough sits over the chalk-and-clay London Basin, with London Clay across the northern districts grading into thinner, chalk-influenced soils as the ground rises south toward the North Downs. Open trenching through that, across period tiled paths and mature front gardens, is slow and disruptive, and inside a conservation area it can raise extra heritage considerations. With moling we excavate two small pits at either end of the supply run, drive an impact mole through the ground between them, and pull a new MDPE pipe in behind it. The old lead pipe is disconnected at both ends and left buried. The ground between the pits stays undisturbed, which on a period Bromley frontage is exactly what protects the surfaces you’d otherwise have to reinstate.
Why Replace Lead Pipes?
Bromley’s water is supplied by Thames Water and runs very hard. Thames Water reports an average of around 300 ppm calcium carbonate across its supply area, and independent readings for the BR postcodes sit comfortably in the very hard band. Lead in tap water comes from the old pipe itself, dissolving into water that has been standing in an ageing lead service line overnight. Given how much of Bromley’s housing predates the lead phase-out of the late 1960s, a high number of original lead service lines are still in the ground.
Most Bromley homeowners get in touch after one of these:
- A failed lead test or a flag from their plumber
- A letter from Thames Water about lead in the supply
- Discoloured or metallic-tasting tap water
- Noticeably low water pressure compared to neighbours
- A solicitor or surveyor raising it during a property sale
Replacing the lead supply with MDPE via moling is the standard fix, and for properties inside Bromley’s conservation areas it is usually the preferred method because it avoids surface disturbance almost entirely. Most jobs are completed in a single day.
Key Benefits of Moling
No-Dig, Mess-Free Installation
Protects your landscaping and driveway.
Replaces Old Lead Supply Pipes
Meets modern water safety standards.
Improves Water Pressure
Smooth, wide pipes enhance flow.
Provides Cleaner, Safer Water
Eliminates contamination risk.
Faster & More Affordable
Reduces labour and reinstatement costs.
Our Services
Lead Water Pipe Replacement
Water Main Supply Pipe Replacement
Replacing Water Mains from House
Electric Armoured Cable Installation
Utility Installations
Service Areas (40-Mile Radius of Guildford)
- Surrey
- Hampshire
- Berkshire
- Buckinghamshire
- Oxfordshire
- Hertfordshire
- Sussex
- London
Resources & Guides
Lead Pipe Replacement Cost in 2025 – A Homeowner’s Guide
Typical cost: £800–£2,000, depending on pipe length, access, and surface type. Trenchless moling helps avoid costly restoration work — and we always provide fixed, transparent quotes.
- Discoloured or metallic-tasting water
- Low water pressure
- Frequent leaks or damp spots
- Property built before 1970
- Visible corrosion or old lead/steel pipes
1. Site Survey
2. Moling Setup
3. Pipe Installation
4. Connection
5. Restoration
Most jobs are completed within one day.
07554 708609 Get a quick quote
Areas we cover
Hampshire & Surrey borders: Aldershot, Basingstoke, Camberley, Farnborough, Fleet, Frimley, Hook
South West Surrey: Farnham, Frensham, Godalming, Guildford, Haslemere, Hindhead
North Surrey & Thames: Addlestone, Chertsey, Egham, Epsom, Kingston, Leatherhead
South London: Bromley, Croydon
Sussex & South Surrey: Crawley, Horley, Horsham
© 2026 T&L Moling Contractors
Experts in Trenchless Moling & Lead Pipe Replacement across Bromley and the surrounding areas.